Unità : Language :
Regione : Paese (Regione) :
Rotary Actuator Model Selection Software
Serie incluse

CRB: Attuatore rotante/Tipo a palmola

CRB.jpg
・Features a compact body with a built-in angle adjuster unit
 and auto switch unit (Size: 20, 30, 40)
 Overall length: 44% shorter, Weight: 48% lighter
・Piping, wiring, and angle adjustment can be performed on the same side
 for easier mounting.
・Easy-to-adjust start and end position with the angle adjustment bolts
 (adjustment as standard).
・Rotating angle can be easily checked using the chamfered position of
 the shaft. (Only for CDRB with auto switch)
・Each of the units below for the CRB2 series can be mounted to
 the new CRB series.

CRB2-Z: Attuatore rotante/Tipo a palmola

CRB2.jpg
・It is possible to move the auto switch mounting position as desired.
・Direct mounting
・Connection port position: Select from side ported or axial ported
(When a switch and angle adjuster are installed, only the side ported is selectable.)
・Low-pressure operation: 0.2 MPa (Size 10), 0.15 MPa (Sizes 15 to 40)
・It is possible to adjust the angle as desired.
・With auto switch (CDRB2 series: CDRB2□W, CDRB2□WU)

CRBU2-Z: Attuatore rotante a montaggio universale/Tipo a palmola

CRBU2.jpg
・It is possible to change the starting position freely according to the installation conditions.
・Lightweight: Weight reduced by 12%
・Can be directly installed in 6 different ways
・It is possible to adjust the angle as desired.
・It is possible to set the auto switch mounting position freely.
・With auto switch (CDRBU2 series: CDRBU2, CDRBU2WU)

CRB1: Attuatore rotante/Tipo a palmola

CRB1.jpg
・Compact auto switches are mountable. (D-M9□)
・Stainless steel specification for main parts (Made to Order)
・Two different port locations (side and axial) are available.
・Mounting: Direct mounting, Foot mounting
・With auto switch (Series CDRB1: CDRB1, CDVRB1)

MSU: Unità rotante/Tipo a palmola

MSUA.jpg
・Integrated table and rotary actuator
・Angle adjustable, ±5º at each rotation end (Double: ±2.5º)
・Table deflection accuracy: 0.03 mm or less (MSUA)
・Connection port position: Select from side ported or axial ported 
(When a switch is installed, only the side ported is selectable.)
・It is possible to move the auto switch mounting position as desired.

CRJ: Attuatore rotante miniaturizzato/Tipo pignone e cremagliera

CRJB.jpg
・Compact, lightweight
・Flexible mounting: Top, bottom, or side mounting is possible.
・Front or side ported is selectable.

CRA1-Z: Attuatore rotante/Tipo pignone e cremagliera

CRA1.jpg
・Compact auto switches (D-M9□ type) are mountable on 2 surfaces. 
Auto switch can be mounted from the front.
・Weight reduced by up to 14%
・With air cushion, Easy adjustment of cushion valve
・With auto switch (CRA1 series: CDRA1, CDRA1□□U, CDVRA1)

CRQ2: Attuatore rotante compatto/Tipo pignone e cremagliera

CRQ2.jpg
・With cushion
・Equipped with an angle adjustment mechanism
・Single or double axis is selectable.
・With auto switch (CDRQ2 series: CDRQ2)

MSQ: Unità rotante/Tipo pignone e cremagliera

MSQA.jpg
・Integrated table and rotary actuator
・Equipped with an angle adjustment mechanism
・Easy alignment when mounting the load and the body
・Built-in shock absorber type and external absorber type are selectable.

MSZ: Unità rotante a 3 posizioni

MSZA.jpg
・3-point-stopping is possible.
・Suitable for applications such as distributing workpieces to the left, right, and center
・Can be operated with one valve

CRQ2X: Attuatore rotante compatto a bassa velocità/Tipo pignone e cremagliera

CRQ2X.jpg
・It is possible to transfer workpieces at lower speeds. (5 s/90º)
・With auto switch (CDRQ2X series: CDRQ2X)

MSQX: Unità rotante a bassa velocità/Tipo pignone e cremagliera

MSQX.jpg
・It is possible to transfer workpieces at lower speeds. (5 s/90º)
・With auto switch (CDRQ2X series: CDRQ2X)

MRQ: Attuatore rotante

MRQ.jpg
・Rectilinear rotation unit that integrates a slim cylinder and a rotary actuator
・It is possible to select types with an air cushion on the linear motion parts.
・Angle adjustable

 

Nota : Escludere le specifiche speciali e il prodotto speciale.

Nota : Nonostante le serie abbiano completato il processo di aggiornamento secondo la normativa RoHS (sulla base della spedizione dalla fabbrica) e sui cataloghi sia presente il marchio RoHS, prego richiedere prodotti conformi RoHS al venditore al momento dell'ordine.

Precauzioni

1. Il dimensionamento e i risultati del calcolo ottenuti con il Software possono differire da quelli ottenuti mediante apparecchiatura reale.

2. Per usare un prodotto contenuto in questo software, leggere le “Istruzioni di sicurezza”, “Precauzioni”,“Precauzioni specifiche del prodotto”e “Specifiche” descritte nel manuale dell’apparecchio corrispondente.

3. Il Software e i prodotti in esso contenuti sono soggetti a modifiche senza preavviso.

4. SMC non garantisce la qualità con questo Software né la precisione del dimensionamento e i risultati del calcolo ottenuti dal Software stesso.

5. SMC non è responsabile dei malfunzionamenti causati dall'utilizzo del Software.

Requisiti del sistema

Google Chrome 49.0 o versione successive

Microsoft Internet Explorer 11.0 o versione successive

Mozilla Firefox 61.0 o versione successive

Safari 11.0 o versione successive

Microsoft Edge 17 o versione successive

Version:1.7.00